Industrial Coding and Marking Systems: Marking system using spray mark blocks

REA JET Spray Mark Blocks

Spray Mark Technology

REA JET Spray Mark Blocks are used wherever product marking must be clearly visible from a distance. Alphanumeric information such as material descriptions, batch numbers and logos with a print height of 700 mm can be printed. In the aluminum and steel industries, the use of heat resistant paints and hot mark paints is an important requirement for modern spray technology systems.

Product Details

Type REA JET ST SRP-7 to -32: alphanumeric coding and marking up to 50 m/min, even mith anneal-proof paints (25 - 700 mm print height)
Type REA JET ST SRB-7 to -9: alphanumeric coding and marking up to 80 m/min, even with hot mark paints (40 to 240 mm print height)
Type REA JET ST SRB-7 Compact: spray mark block with compact dimensions for alphanumeric coding and marking up to 80 m/min (20 to 130 mm print height)
Nozzles sizes for different dot size: 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm

Applications
Inks

two-dimensional application of contrast colors ("color mirror") on dark and dirty surfaces
REA Plug & Print Technology ^(RJ) represents a high level of system availability and process reliability. Quickest change procedure for modular components including: spray mark head, nozzle needle (nozzle size), material pressure tank
the spray mark technology blocks for alphanumeric coding and marking reflect REA JET's guiding design principle of modularity, so that customizations can be made as quickly as possible

heat resistant paints and hot marking paints up to 1000 degrees Celsius
wide selection of reliable marking paints, primer and solvents
Inks based on alcohol, acetone, or MEK, as well as solvent-based paints, lacquers and temper paints
special paints such as water-based lacquers, UV and fluorescent paints, adhesives based on water or solvents, resins, abrasive media, oils, adhesives and many more
approved cleaners are available for each spray mark medium